To change the WebServer IP Address on a Facial Recognition Clock (Touch Screen Menu)...
1) Access the Menu (supplying authentication as needed) and Select "Comm"
2) From the Comm menu, Select WebServer Set
3) In WebServer Set, ensure that clock is configured for IP Mode
4) Press the IP Address Button to modify
a) Use the "Left Arrow" to delete single characters or press "C" to Clear Existing
b) Enter the correct Address (104.239.247.100)
c) Press OK when done
5) Verify that Server Port Number is 80
6) Press Save in the upper right, then press Exit to return to the Idle screen.
7) Reboot the clock by:
a) Holding Power Button (left side of unit) down until power off, then pressing again to power up
b) Unplug power and plug back in again, then press the Power Button to power up again
Unit must not have the optional battery installed for method "b" to work