Target Device

This Document is targeted specifically to the new model Facial Recognition clock that began shipping early / mid year 2017.  These will have a thin (1/8 inch) band between the touchscreen on the top and the infrared lighting array on the bottom.


NOTE:

The models with a 1 inch band between the touchscreen and infrared lighting array that also contain F1 ~ F6 capacitive touch buttons are the predecessor model and are NOT covered by this document.


The new generation firmware supports up to 6 separate JobCode Groups that the employees can use while clocking.  Please see this article https://sundialtimesystems.freshdesk.com/support/solutions/articles/1000276878  for setting up your Function Keys 


In order to use the new Job Code functionality offered by the new generation firmware, it must be configured.  


Configuring Job Codes requires Access the clock menu and selecting "Job Code"

Configuring Job Code Options

  1. Job Code Required
    If you will be linking Job Selection to other Punch Types, then this must be "ON" 
  2. Input Screen Timeout(s)
    This is a value, in seconds, that trigger a timeout.  The Selection or Entry does not have to be completed within this time.  As long as the user interacts with the device within this time, it will continue.
  3. Job Code Must Defined
    Selecting ON will require that the employee make a selection from the list.
    Selecting OFF will allow the employee to choose from the list, or make their own entry using a touchscreen keypad


Configuring Job Group Options

There are 6 Job Groups.  Each group has 2 settings.  Enabling / Disabling and Setting the Name

  1. Job Group X
    ON enables the Job Group
    OFF disables the Job Group
  2. Set Job Group Name
    Opens a touchscreen keyboard for entering the Job Group Name


Adding Job Items

New Job Code

  1. Job Group ID
    Defaults to Job Group 1
    Use this to select an different enabled group
  2. Job Code ID
    Opens a numeric input dialog for specifying the Job Code for this Job Item
  3. Job Code Name
    Opens the touchscreen keyboard for entering the name of this Job Item


Editing Job Items

All Job Codes

  • Select the Group
    • Select the Item to Edit
      • Choose Edit or Delete
        • If Edit, Modify Name and/or ID
        • If Delete, Confirm Yes to delete or No to abort