Sundial Time Systems

Use the Clear All option in System >> Data, then manually reconfigure the Networking elements

If the clock is connected to a Web Client, you can clear the data by issuing the command

Option:

  CMD CLEAR

Value

  DATA

If the client has "Restored Factory Settings" on a Series 10 device, the following needs to be applied

Connect to Server

Create Configuration

  Add the Clock Configuration to an account if there isn't one already

  Put it in a separate clock group to prevent the server from sending employees to it

Use Menu >> Comm >> Network

  Manually enable DHCP (or set a Manual IP, Mask, Gateway and DNS)

Use Menu >> Comm >> Web Server Set

  Set up the Server IP to: 104.239.247.100

  Set the Server Port to: 80