Sundial Time Systems

It is recommended that you create the employee's entry in Realtime and assign them a clock ID before beginning these steps (Use step 3.2). If not, you w...

This guide can be downloaded and printed.

Use the Clear All option in System >> Data, then manually reconfigure the Networking elements If the clock is connected to a Web Client, you can c...

Copy the text between the double lines (Not including the double lines) at the end of this document. You will use either #WEP Types or #WPA Types, depending...

See this page: Realtime Web - Require In or Out at clock  

Enrolling:     1) If you have small (especially narrow) fingers, use your widest fingers, even your thumb, so that you have the maximum possible contac...

Q: Everyone in our office can walk in and touch in at the fingerprint time clock just once and they are clocked in. I've never had to "try again...

Series 10 and RS232 Serial When using a Series 10 time clock Serial Cable connection to the Host Computer, you will need to assemble the Serial Cable...

New Generation Firmware (Series 15, Newer Series 800 and Series 400):     Menu > System > Fingerprint Original Firmware (Series 10 and Older Series ...

Remove screw from bottom that holds bracket. Pull bottom away from wall about 1/2 inch. Lift off bracket. Remove bracket from wall.