Format:

Each of the settings described here are sent to the clock(s) using

  Setup >> Clock Groups >> [edit specific clock group] >> Clock Tools >> Set Clock Option

Commands are sent as a Name / Value pair.  Instructions below will be shown as

    [Name]

    [Value]


**Note: Steps are slightly different for using JobCodes - Please see this article for Job Codes:

  https://sundialtimesystems.freshdesk.com/a/solutions/articles/1000306099

Set up the Desktop Style

(using menu: Personalize >> User Interface >> Main Screen Style)

Use this article to understand the desktopStyle choices:
  https://sundialtimesystems.freshdesk.com/a/solutions/articles/1000315330

Command:

  desktopStyle

  1

Set Punch State Mode

(Using menu: Personalize >> Punch State Options >> Punch State Mode)

** Note: Skip this if you do not need to use Punch State selections

Use this article to understand the StateMode choices:

  https://sundialtimesystems.freshdesk.com/a/solutions/articles/1000315331

Command:

  StateMode

  1

Set Punch State Timeout

Use this to specify the Timeout, in seconds, of a selected State key

** Note: Skip this if you do not need to use Punch State selections

Command:

  TOState
  5

Set the Requirement to select a WorkCode

Command:
  MustChoiceWorkCode
  1
Set the WorkCode Mode to List View

Command:

  ~CtrWkcdMode
  1

Require that the WorkCode be checked against the internally stored list

Command:

  ~MCWKCD

  1

Add WorkCode Items

(Using menu: Work Code >> New Work Code)

Add any needed entries to the WorkCode list

Command:

  CMD DATA

  UPDATE WORKCODE CODE=<numeric value>\tName=<string value>

Setup Function Keys

(Using menu: Personalize >> Shortcut Key Mappings)

** Note: Skip this if you do not need to use Punch State selections

Use this to specify which Function Keys have Punch Modes associated.

Create in Reverse order so that there are not any Duplicated State Codes or Map Values

Commands:

  CMD DATA

  UPDATE SHORTKEY keyID=4\tkeyFun=0\tstateCode=255

  
  CMD DATA
  UPDATE SHORTKEY keyID=3\tkeyFun=0\tstateCode=255

  CMD DATA
  UPDATE SHORTKEY keyID=2\tkeyFun=1\tstateCode=5\tkeyLabel=Switch\tmapValue=5

  CMD DATA
  UPDATE SHORTKEY keyID=1\tkeyFun=1\tstateCode=0\tkeyLabel=Punch\tmapValue=0

This allows users to simply walk up and swipe, then select a WorkCode.  It also allows selection of F2 for Switch, or F1 to revert back to a regular punch if they didn't mean to select F2.    


Refer to: 

Faceprint Clock - Configuring Function Keys Remotely (New Generation)

https://sundialtimesystems.freshdesk.com/a/solutions/articles/1000277026


Series 15 - Set up Function Keys

https://sundialtimesystems.freshdesk.com/a/solutions/articles/1000298331